Dear Swakula Bandhus,
Vinay Bhandare has sent this information.
please make use of this and inform other Swakula Bandhus who are in lookout for a job.
Regards,
Srikanth Shankar Matrubai
Also visit
http://goodfundsadvisor.blogspot.com
Vinay Bhandare has sent this information.
please make use of this and inform other Swakula Bandhus who are in lookout for a job.
Below are the open position in Delphi. If your profile matches any of these requirements then send your resume to me at vinay.bhandare@delphi.com and vinay.bhandare@gmail.com
Forward this to your friends.
OPEN POSITIONS AT DELPHI, TECHNICAL CENTER INDIA, BANGALORE
AUTOSAR Engineer
• Proficient in Embedded C
• Good knowledge of 16/32 bit Microcontroller architecture
• Experience/ exposure to vehicle in-network protocols like CAN/ LIN/ FLEXRAY etc.
• Experience with debuggers (simulators & emulators)
• Requirement Analysis, Design, coding, unit testing of AUTOSAR BSW Modules
• Creation of Picea Integration Package for various platforms (e.g. NEC, Tricore, Free scale etc)
• Porting/ migration of legacy SW architecture to AUTOSAR compliant architecture
• Customer Support for Configuration/ Integration of Picea (Mecel AUTOSAR Tool Chain) Modules
• Sound Knowledge of AUTOSAR architecture and Configuration Tool chain.
• Experience in Development of AUTOSAR Compliant Communication services, Memory services,
and System services stack etc
• Knowledge in Perl and VC++.
• Version Control Tools (CM Synergy/ Clear case)
2years to 5years
B.E. / B.Tech / M.E. / M.Tech in Electronics /Communication / Electrical /
Instrumentation with 60+% aggregate starting from Class X till UG/PG.
Software Engineer / Advanced Software Engineer – PT DEG
• - Hands-on experience in 16 & 32 bit Micro-controller device driver software development
• - Hands on experience in cross compilers and debugging tools like Lauterbach (Trace32)
• - Hands on experience in layered software architecture development environment
• - Exposure to C and assembly language embedded software programming
• - Experience in serial communication protocols- CAN, SPI & LIN.
• - Hands on experience for reprogramming and instrumentation
• - Expertise with software development life cycles
• - Shall be able to guide 8-10 engineers for software architecture, design and day to day technical
requirements
• - Exposure to project scheduling and estimation techniques is desirable
• - Good analytical and problem solving skills with excellent communication skills
• - Sound knowledge of microcontroller interfacing circuit and digital design
• - Exposure to requirement gathering and requirement definition
• - Hand-On experience with design methodologies. A design experience with UML will be added
advantage.
• - Powertrain automotive background exposure will be an advantage
2years to 5years
B.E. / B.Tech / M.E. / M.Tech in Electronics /Communication / Electrical /
Instrumentation with 60+% aggregate starting from Class X till UG/PG.
Resident System Engineer
• Experience/Exposure to embedded development cycle
• Experience/Exposure to vehicle in-network protocols like CAN,IVN etc.,
• Good Communication skill
• Experience in supporting customers on automobile electronics.
• Support the customer and the design team pre-production
• Frequently visit customer and build relationship
• Generate reports
3years to 8 years (automotive domain)
Diploma / B.E. / B.Tech / M.E. / M.Tech in Electronics /Communication / Electrical /
Instrumentation 60+% aggregate starting from Class X till UG/PG.
MATLAB Engineer
• Good in embedded C programming
• Good understanding of Matlab/Simulink/Stateflow and M scripting.
• Auto coding experience with any code generation tools like Targetlink , RTW E-coder etc.
• Good Understanding of Model/Auto code verification methods(MIL , SIL , PIL)
• Good understanding of fixed point algorithm.
• Experience with using Reactis tool is an added advantage
2 - 6 years
B.E. / B.Tech / M.E. / M.Tech in Electronics /Communication / Electrical /
Instrumentation 60+% aggregate starting from Class X till UG/PG.
Software Engineer – Body Control Module
Skills Required:
• Embedded software development using C – Language ( mandatory)
• Familiarity with Configuration Management – Mandatory
• Working in Automotive domain – Mandatory
• Development of SW for Body computer applications – Preferred
• Working experience with Autosar framework – Preferred
• Working knowledge with working any one of the 16 or 32 bit micro controllers - Mandatory
2 - 6 years
B.E. / B.Tech / M.E. / M.Tech in Electronics /Communication / Electrical /
Instrumentation 60+% aggregate starting from Class X till UG/PG.
Software Engineer – Infotainment
• Good Embedded knowledge and C,C++ programming skills
• Responsible for requirement analysis, design, implementation, test plan generation and testing of
software components.
• Good knowledge in 32 -bit Micros , preferably with NEC V850, NEC 78K0 series and Free scale
i.MX processors
• Good knowledge on operating Systems Linux, QNX, etc ; experience in UI development tools like
QT and other Open GL tools
• Good knowledge in handling the tools like debuggers, simulators, oscilloscopes, Vector CAN
Analyzer, Vector CANoe etc.
• Knowledge of serial Communication protocols viz. KWP2000, CAN, LIN, J1939 and GMLAN
• Good understand of I2C, SPI protocols and handling of the Peripheral devices like LCD,
EEPROM etc.
• Good process and problem solving skills is desirable
• Infotainment Product knowledge is preferred and not must
: 2 - 6 years.
: B.E. / B.Tech / M.E. / M.Tech in Electronics /Communication / Electrical / Instrumentation
60+% aggregate starting from Class X till UG/PG.
System Engineer – Infotainment
• Hands on experience with Software and/or Systems development of Infotainment, Driver
Information and Instrument Clusters or Multi Function Displays.
• Good CAN and Network management/Powermoding/Infotainment features such as Media Player,
Blue Tooth, AM/FM or Cluster Features such as Tell-Tales, Gauges, Trip Computer, Tacho
Graph.
• Strong embedded domain knowledge and low level driver and start up code. Engineers with
experience in board design, EMI/EMC, Independent Test and Validation may also be considered.
• AUTOSAR experience will be an added advantage.
: 3 - 5 years.
: B.E. / B.Tech / M.E. / M.Tech in Electronics /Communication / Electrical / Instrumentation
60+% aggregate starting from Class X till UG/PG.
Mechanical Analysis Engineer/CAE (Structural Analysis)
• Strong background of FEM, Vibrations, Mechanics & Strength of Materials, Solid mechanics,
Fatigue, Reliability
• Strong knowledge of non-linear and contact mechanics, dynamics, shock, impact and other
structural CAE methods
• Knowledge of Commercial tools such as ANSYS, ABAQUS, UG etc..
• Strong understanding of physics related to structural performance of components in harsh and
dynamic environment such as in automotive industry
• Experience in Electronics Packaging industry is a plus
• Interact with Mechanical Design Engineers to understand the design and performance
requirements.
• Conduct FEA analysis by using right modeling techniques and making right assumptions. Use
commercial tools such as ANSYS, ABAQUS as needed. Prepare reports
• Understand structural performance, interpret results intelligently and develop design
improvements.
• Participate in peer reviews, failure analysis and drive product improvements as necessary
• Will work independently on programs and will be responsible for deliveries on weekly basis.
: 3 Years to 8 Years
(Minimum Experience of 3 Years as a Mechanical Analysis Engineer)
: M.Tech in Mech/Aero/Applied Mechanics from a reputed institution
such as IIT/IISc/REC
Thanks to
Vinay Bhandare
Mobile: +919663942389
Regards,
Srikanth Shankar Matrubai
Also visit
http://goodfundsadvisor.blogspot.com
