Thursday, February 23, 2012

Open positions in Delphi, TECHNICAL CENTER INDIA, BANGALORE

 Dear Swakula Bandhus,
Vinay Bhandare has sent this information.
please make use of this and inform other Swakula Bandhus who are in lookout for a job.


Below are the open position in Delphi. If your profile matches any of these requirements then send your resume to me at vinay.bhandare@delphi.com and vinay.bhandare@gmail.com
Forward this to your friends.



  OPEN POSITIONS AT DELPHI, TECHNICAL CENTER INDIA, BANGALORE
  AUTOSAR Engineer
    

•  Proficient in Embedded C
•  Good knowledge of 16/32 bit Microcontroller architecture 
•  Experience/ exposure to vehicle in-network protocols like CAN/ LIN/ FLEXRAY etc.
•  Experience with debuggers (simulators & emulators) 


•  Requirement Analysis, Design, coding, unit testing of AUTOSAR BSW Modules 
•  Creation of Picea Integration Package for various platforms (e.g. NEC, Tricore, Free scale etc)
•  Porting/ migration of legacy SW architecture to AUTOSAR compliant architecture
•  Customer Support for Configuration/ Integration of Picea (Mecel AUTOSAR Tool Chain) Modules


  
•  Sound Knowledge of AUTOSAR architecture and Configuration Tool chain.
•  Experience in Development of AUTOSAR Compliant Communication services, Memory services,
and System services stack etc
•  Knowledge in Perl and VC++.
•  Version Control Tools (CM Synergy/ Clear case)

         2years to 5years  

        B.E. / B.Tech / M.E. / M.Tech in Electronics /Communication / Electrical /       
                              Instrumentation with 60+% aggregate starting from Class X till UG/PG.



  Software Engineer / Advanced Software Engineer – PT DEG



•  - Hands-on experience in 16 & 32 bit Micro-controller device driver software development
•  - Hands on experience in cross compilers and debugging tools like Lauterbach (Trace32)
•  - Hands on experience in layered software architecture development environment
•  - Exposure to C and assembly language embedded software programming
•  - Experience in serial communication protocols- CAN, SPI & LIN.
•  - Hands on experience for reprogramming and instrumentation
•  - Expertise with software development life cycles
•  - Shall be able to guide 8-10 engineers for software architecture, design and day to day technical
requirements
•  - Exposure to project scheduling and estimation techniques is desirable
•  - Good analytical and problem solving skills with excellent communication skills


•  - Sound knowledge of microcontroller interfacing circuit and digital design
•  - Exposure to requirement gathering and requirement definition
•  - Hand-On experience with design methodologies. A design experience with UML will be added
advantage.
•  - Powertrain automotive background exposure will be an advantage

        2years to 5years  

       B.E. / B.Tech / M.E. / M.Tech in Electronics /Communication / Electrical /       
                             Instrumentation with 60+% aggregate starting from Class X till UG/PG.



  Resident System Engineer


•  Experience/Exposure to embedded development cycle
•  Experience/Exposure to vehicle in-network protocols like CAN,IVN etc.,
•  Good Communication skill
•  Experience in supporting customers on automobile electronics.
•  Support the customer and the design team pre-production
•  Frequently visit customer and build relationship
•  Generate reports 

    
  

      3years to 8 years (automotive domain)

     Diploma / B.E. / B.Tech / M.E. / M.Tech in Electronics /Communication / Electrical /   
                           Instrumentation 60+% aggregate starting from Class X till UG/PG.



  MATLAB Engineer
      

•  Good in embedded C programming
•  Good understanding of Matlab/Simulink/Stateflow and M scripting.
•  Auto coding experience with any code generation tools like Targetlink , RTW E-coder etc.
•  Good Understanding of Model/Auto code verification methods(MIL ,  SIL , PIL)
•  Good understanding of fixed point algorithm.
•  Experience with using Reactis tool is an added advantage

        2 - 6 years 

        B.E. / B.Tech / M.E. / M.Tech in Electronics /Communication / Electrical / 
                              Instrumentation   60+% aggregate starting from Class X till UG/PG.


  Software Engineer – Body Control Module

       Skills Required:

•  Embedded software development using C – Language ( mandatory)
•  Familiarity with Configuration Management – Mandatory
•  Working in Automotive domain – Mandatory
•  Development of SW for Body computer  applications – Preferred
•  Working experience with Autosar framework – Preferred
•  Working knowledge with working any one of the 16 or 32 bit micro controllers - Mandatory

 2 - 6 years 

         B.E. / B.Tech / M.E. / M.Tech in Electronics /Communication / Electrical / 
                              Instrumentation   60+% aggregate starting from Class X till UG/PG.

  Software Engineer – Infotainment
             

•  Good Embedded knowledge and C,C++ programming skills
•  Responsible for requirement analysis, design, implementation, test plan generation and testing of
software components.
•  Good knowledge in 32 -bit Micros , preferably with NEC V850, NEC 78K0 series and Free scale
i.MX processors
•  Good knowledge on operating Systems Linux, QNX, etc ; experience in UI development tools like
QT and other Open GL tools
•  Good knowledge in handling the tools like debuggers, simulators, oscilloscopes, Vector CAN
Analyzer, Vector CANoe etc.
•  Knowledge of serial Communication protocols viz. KWP2000, CAN, LIN, J1939 and GMLAN
  
•  Good understand of I2C, SPI protocols and handling of the Peripheral devices like LCD,
EEPROM etc.
•  Good process and problem solving skills is desirable
•  Infotainment Product knowledge is preferred and not must
  
: 2 - 6 years.
  
: B.E. / B.Tech / M.E. / M.Tech in Electronics /Communication / Electrical / Instrumentation
60+% aggregate starting from Class X till UG/PG.



  System Engineer – Infotainment


•  Hands on experience with Software and/or Systems development of Infotainment, Driver
Information and Instrument Clusters or Multi Function Displays.
•  Good CAN and Network management/Powermoding/Infotainment features such as Media Player,
Blue Tooth, AM/FM or Cluster Features such as Tell-Tales, Gauges, Trip Computer, Tacho
Graph.
•  Strong embedded domain knowledge and low level driver and start up code.  Engineers with
experience in board design, EMI/EMC,  Independent Test and Validation may also be considered.
•  AUTOSAR experience will be an added advantage.

: 3 - 5 years.
  
: B.E. / B.Tech / M.E. / M.Tech in Electronics /Communication / Electrical / Instrumentation
60+% aggregate starting from Class X till UG/PG.



  Mechanical Analysis Engineer/CAE (Structural Analysis)
  

•  Strong background of FEM, Vibrations, Mechanics & Strength of Materials, Solid mechanics,
Fatigue, Reliability
•  Strong knowledge of non-linear and contact mechanics, dynamics, shock, impact and other
structural CAE methods
•  Knowledge of Commercial tools such as ANSYS, ABAQUS, UG etc..
•  Strong understanding of physics related to structural performance of components in harsh and
dynamic environment such as in automotive industry
•  Experience in Electronics Packaging industry is a plus


•  Interact with Mechanical Design Engineers to understand the design and performance
requirements.
•  Conduct FEA analysis by using right modeling techniques and making right assumptions. Use
commercial tools such as ANSYS, ABAQUS as needed. Prepare reports
•  Understand structural performance, interpret results intelligently and develop design
improvements.
•  Participate in peer reviews, failure analysis and drive product improvements as necessary
•  Will work independently on programs and will be responsible for deliveries on weekly basis. 

:  3 Years to 8 Years 
(Minimum Experience of 3 Years as a Mechanical Analysis Engineer)


: M.Tech in Mech/Aero/Applied Mechanics from a reputed institution 
      such as IIT/IISc/REC 



Thanks to
Vinay Bhandare
Mobile: +919663942389



Regards,
Srikanth Shankar Matrubai
Also visit
http://goodfundsadvisor.blogspot.com
Bookmark and Share

No comments:

Post a Comment